Select Page

China high quality Attractive Price Hydraulic Cylinder Large Excavator Hydraulic Stick Cylinder Manufacturers vacuum pump for ac

Product Description

Attractive Price Hydraulic Cylinder Large Excavator Hydraulic Stick Cylinder manufacturers

 

Hydraulic Stick Cylinder

A stick cylinder, a dipper or arm cylinder, is a hydraulic cylinder used in excavators and other construction equipment. It is specifically designed to control the movement of the stick or dipper arm, which is the part of the excavator that extends and retracts to adjust the reach and CHINAMFG depth.The stick cylinder works with other hydraulic cylinders, such as the boom and bucket cylinders, to enable precise and controlled excavating operations. 
Specification of Stick Cylinder
Bore diameter: 210mm~360mm
Rod diameter: 145mm~260mm
Stroke≤2600mm
Maximum 3560.8KN
Pressure35MPa

Here are some key points about the application and function of a stick cylinder:

  1. Stick Arm Movement: The stick cylinder is responsible for extending and retracting the stick arm of an excavator. The stick arm is attached to the boom and extends outward to increase the reach and CHINAMFG depth of the machine. By extending or retracting the stick cylinder, the operator can adjust the length of the stick arm according to the excavation requirements.

  2. Hydraulic Power: The stick cylinder operates using hydraulic power supplied by the excavator's hydraulic system. Pressurized hydraulic fluid, typically oil, is directed to the cylinder, creating a force extending or retracting the piston rod. The operator controls the hydraulic pressure through control valves, allowing for precise movement and positioning of the stick arm.

  3. Digging and Material Handling: The stick cylinder is crucial in excavating tasks. By extending the stick arm, the cylinder allows the excavator bucket to reach deeper into the ground, enabling efficient digging, trenching, and material loading operations. The stick arm's length can be adjusted to match specific job requirements, ensuring optimal CHINAMFG performance.

  4. Versatility: The stick cylinder enhances the excavator's versatility by enabling the machine to adapt to different excavation conditions. By extending the stick arm, the excavator can reach over obstacles, dig in hard-to-reach areas, or perform tasks that require extended reach, such as slope grading or deep foundation excavations.

  5. Control and Safety: Like other hydraulic cylinders in the excavator, the stick cylinder offers precise control over the stick arm's movement. This control allows operators to position the bucket and control the excavation process accurately. Additionally, the hydraulic system and cylinder design incorporate safety features to prevent sudden movements or unexpected cylinder failures, ensuring the operator's and surrounding personnel's safety.

What are some everyday tasks that require using the stick cylinder in excavators?

The stick cylinder in excavators is used for various tasks that require precise control over the extension and retraction of the stick arm. Some common duties where the stick cylinder is essential include:

1. CHINAMFG Trenches: When excavating trenches, the stick cylinder allows the operator to extend the stick arm to the desired depth. This enables efficient trenching for utility installation, pipeline laying, or any application that requires excavating long and narrow channels.

2. Loading and Unloading: The stick cylinder is utilized when loading materials CHINAMFG trucks or unloading them from containers or stockpiles. By extending the stick arm, the excavator can reach higher or farther to load or unload materials accurately and efficiently.

3. Excavating Foundations: When preparing construction sites, the stick cylinder is crucial for excavating foundations. It allows the operator to extend the stick arm to reach the desired depth and accurately remove soil or debris, ensuring a stable and level foundation for construction projects.

4. Slope Grading: The stick cylinder is used for slope grading tasks, where the excavator is employed to shape and level slopes for road construction, landscaping, or erosion control. By extending or retracting the stick arm, the operator can adjust the reach and angle of the bucket, enabling precise grading operations.

5. CHINAMFG Obstacles: In specific scenarios, the excavator must reach over obstacles such as walls, barriers, or structures. The stick cylinder allows the operator to extend the arm, providing the necessary reach to access areas obstructed by obstacles.

6. Deep Excavations: The stick cylinder extends the stick arm to the required depth for deep excavations, such as building basements or underground structures. This allows for efficient excavation at significant depths while maintaining stability and control.

7. Material Sorting and Handling: The stick cylinder is employed in material sorting and handling tasks, where the excavator separates and moves different types of materials. By extending or retracting the stick arm, the excavator can position the bucket accurately to pick up, sort, or place materials in designated areas.

These are just a few examples of the tasks that require using the stick cylinder in excavators. The stick cylinder's ability to control the extension and retraction of the stick arm provides operators with the versatility and precision necessary to perform a wide range of excavation and material handling operations efficiently.

Our Company

We have a first-class independent R&D platform for assembly. The forklift cylinder production workshop has 4 semi-automatic lifting cylinder assembly lines and 1 fully automatic tilting cylinder assembly line, with a designed annual production capacity of 1 million pieces; the special cylinder workshop is equipped with semi-automatic cleaning and assembly systems of various specifications, with a designed annual production capacity of 200,000 essays. It has famous CNC machining equipment, machining centers, special equipment for high-precision cylinder processing, robot welding machines, automatic cleaning machines, automatic cylinder assembly machines, and automatic paint production lines. We have more than 300 sets of critical equipment running. The optimized allocation and efficient utilization of equipment resources ensure the precision requirements of the products and meet the high standard quality requirements of the products.

   Forklift cylinder assembly shop

 Other types of cylinder assembly shop

Welding

Painting & coating

     Painting & coating line

  Fully automatic water-based

Testing

To further improve product performance, and establish the leadership position of our hydraulic cylinder in the industry, our company and zjimee jointly established a Comprehensive performance laboratory of hydraulic cylinders, hydraulic valves, and hydraulic pumps; the lab is computer-assisted testing, using electro-hydraulic control technology, the test conditions preset by computer, which improves the test accuracy and system versatility, and the experimental data.
The automatic collection is realized through the application of sensors, and the output data, such as the internal leakage and load efficiency of the cylinder or the valve, are directly processed by the computer and converted to standard units (ml/min; %). At the same time, to ensure the working safety of the hydraulic system, the state monitoring function is carried out for key performance parameters, such as "oil temperature monitoring, liquid level monitoring, filter device monitoring," etc. Among them, the hydraulic cylinder test stand can test the performance of "load efficiency" and "internal leakage" by readings. At the same time, it is equipped with a grating ruler measuring instrument, which meets the requirements of all test items of hydraulic cylinder products in the national standard.

Our Factory

Packaging & Shipping

Certification: GS, RoHS, CE, ISO9001
Pressure: High Pressure
Work Temperature: Normal Temperature
Acting Way: Double Acting
Working Method: Rotary
Adjusted Form: Regulated Type

hydraulic cylinder

What advancements in hydraulic cylinder technology have improved sealing and reliability?

Advancements in hydraulic cylinder technology have continuously contributed to improving sealing and reliability in hydraulic systems. These advancements aim to address common challenges such as leakage, wear, and failure of seals, ensuring optimal performance and longevity. Here are several key advancements that have significantly improved sealing and reliability in hydraulic cylinders:

1. High-Performance Sealing Materials:

- The development of advanced sealing materials has greatly improved the sealing capabilities of hydraulic cylinders. Traditional sealing materials like rubber have been replaced or enhanced with high-performance materials such as polyurethane, PTFE (polytetrafluoroethylene), and various composite materials. These materials offer superior resistance to wear, temperature, and chemical degradation, resulting in improved sealing performance and extended seal life.

2. Enhanced Seal Designs:

- Advancements in seal designs have focused on improving sealing efficiency and reliability. Innovative seal profiles, such as lip seals, wipers, and scrapers, have been developed to optimize fluid retention and prevent contamination. These designs provide better sealing performance, minimizing the risk of fluid leakage and maintaining system integrity. Additionally, improved seal geometries and manufacturing techniques ensure tighter tolerances, reducing the potential for seal failure due to misalignment or extrusion.

3. Integrated Seal and Bearing Systems:

- Hydraulic cylinders now incorporate integrated seal and bearing systems, where the sealing elements also serve as bearing surfaces. This design approach reduces the number of components and potential failure points, improving overall reliability. By integrating seals and bearings, the risk of seal damage or displacement due to excessive loads or misalignment is minimized, resulting in enhanced sealing performance and increased reliability.

4. Advanced Coatings and Surface Treatments:

- The application of advanced coatings and surface treatments to hydraulic cylinder components has significantly improved sealing and reliability. Coatings such as chrome plating or ceramic coatings enhance surface hardness, wear resistance, and corrosion resistance. These surface treatments provide a smoother and more durable surface for seals to operate against, reducing friction and improving sealing performance. Moreover, specialized coatings can also provide self-lubricating properties, reducing the need for additional lubrication and enhancing reliability.

5. Sealing System Monitoring and Diagnostic Technologies:

- The integration of monitoring and diagnostic technologies in hydraulic systems has revolutionized seal performance and reliability. Sensors and monitoring systems can detect and alert operators to potential seal failures or leaks before they escalate. Real-time monitoring of pressure, temperature, and seal performance parameters allows for proactive maintenance and early intervention, preventing costly downtime and ensuring optimal sealing and reliability.

6. Computational Modeling and Simulation:

- Computational modeling and simulation techniques have played a significant role in advancing hydraulic cylinder sealing and reliability. These tools enable engineers to analyze and optimize seal designs, fluid flow dynamics, and contact stresses. By simulating various operating conditions, potential issues such as seal extrusion, wear, or leakage can be identified and mitigated early in the design phase, resulting in improved sealing performance and enhanced reliability.

7. Systematic Maintenance Practices:

- Advances in hydraulic cylinder technology have also emphasized the importance of systematic maintenance practices to ensure sealing and overall system reliability. Regular inspection, lubrication, and replacement of seals, as well as routine system flushing and filtration, help prevent premature seal failure and optimize sealing performance. Implementing preventive maintenance schedules and adhering to recommended service intervals contribute to extended seal life and enhanced reliability.

In summary, advancements in hydraulic cylinder technology have led to significant improvements in sealing and reliability. High-performance sealing materials, enhanced seal designs, integrated seal and bearing systems, advanced coatings and surface treatments, sealing system monitoring and diagnostics, computational modeling and simulation, and systematic maintenance practices have all played key roles in achieving optimal sealing performance and increased reliability. These advancements have resulted in more efficient and dependable hydraulic systems, minimizing leakage, wear, and failure of seals, and ultimately improving the overall performance and longevity of hydraulic cylinders in diverse applications.

hydraulic cylinder

Handling the Challenges of Minimizing Fluid Leaks and Contamination in Hydraulic Cylinders

Hydraulic cylinders face challenges when it comes to minimizing fluid leaks and contamination, as these issues can impact the performance, reliability, and lifespan of the system. However, there are several measures and design considerations that help address these challenges effectively. Let's explore how hydraulic cylinders handle the challenges of minimizing fluid leaks and contamination:

  1. Sealing Systems: Hydraulic cylinders employ advanced sealing systems to prevent fluid leaks. These systems typically include various types of seals, such as piston seals, rod seals, and wiper seals. The seals are designed to create a tight and reliable barrier between the moving components of the cylinder and the external environment, minimizing the risk of fluid leakage.
  2. Seal Material Selection: The choice of seal materials is crucial in minimizing fluid leaks and contamination. Hydraulic cylinder manufacturers carefully select seal materials that are compatible with the hydraulic fluid used and resistant to wear, abrasion, and chemical degradation. This ensures the longevity and effectiveness of the seals, reducing the likelihood of leaks or premature seal failure.
  3. Proper Installation and Maintenance: Ensuring proper installation and regular maintenance of hydraulic cylinders is essential for minimizing fluid leaks and contamination. During installation, attention should be given to proper alignment, torqueing of bolts, and adherence to recommended procedures. Regular maintenance includes inspecting seals, replacing worn-out components, and addressing any signs of leakage promptly. Proper maintenance practices help identify and rectify issues before they escalate and cause significant problems.
  4. Contamination Control: Hydraulic cylinders incorporate measures to control contamination and maintain fluid cleanliness. This includes the use of filtration systems, such as in-line filters, to remove particles and contaminants from the hydraulic fluid. Additionally, hydraulic reservoirs often have breathers and desiccant filters to prevent moisture and airborne contaminants from entering the system. By controlling contamination, hydraulic cylinders minimize the risk of damage to internal components and maintain optimal system performance.
  5. Environmental Protection: Hydraulic cylinders may be equipped with protective features to safeguard against external contaminants. For example, bellows or protective boots can be installed to shield the rod and seals from debris, dirt, or moisture present in the operating environment. These protective measures help extend the life of the seals and enhance the overall reliability of the hydraulic cylinder.

In summary, hydraulic cylinders employ sealing systems, appropriate seal materials, proper installation and maintenance practices, contamination control measures, and environmental protection features to handle the challenges of minimizing fluid leaks and contamination. By implementing these measures, manufacturers can ensure reliable and long-lasting hydraulic cylinder performance, minimize the risk of fluid leakage, and maintain the cleanliness of the hydraulic system.

hydraulic cylinder

What safety precautions should be followed when working with hydraulic cylinders?

Working with hydraulic cylinders requires strict adherence to safety precautions to prevent accidents, injuries, and damage to equipment or property. Hydraulic systems operate under high pressures and involve moving parts, which can pose serious hazards if not handled properly. Here's a detailed explanation of the safety precautions that should be followed when working with hydraulic cylinders:

1. Training and Knowledge:

- Ensure that personnel working with hydraulic cylinders have received adequate training and possess a thorough understanding of hydraulic system operation, maintenance, and safety protocols. Proper training should cover topics such as hydraulic principles, pressure ratings, safe work practices, and emergency procedures. Only trained and authorized personnel should be allowed to handle hydraulic cylinders.

2. Wear Personal Protective Equipment (PPE):

- Always wear appropriate personal protective equipment when working with hydraulic cylinders. This may include safety glasses, gloves, protective clothing, and steel-toed boots. PPE helps protect against potential hazards, such as hydraulic fluid leaks, flying debris, or accidental contact with moving parts.

3. Hydraulic System Inspection:

- Before working with hydraulic cylinders, inspect the entire hydraulic system for any signs of damage, leaks, or loose connections. Check hydraulic hoses, fittings, valves, and cylinders for integrity and secure fastening. If any issues are detected, the system should be repaired or serviced before operation.

4. Relieve Pressure:

- Before performing any maintenance or disassembly on a hydraulic cylinder, it is crucial to relieve the pressure in the system. Follow the manufacturer's instructions to properly release pressure and ensure that the hydraulic cylinder is depressurized before starting any work. Failure to do so can result in sudden and uncontrolled movement of the cylinder or hydraulic lines, leading to serious injuries.

5. Lockout/Tagout Procedures:

- Implement lockout/tagout procedures to prevent accidental energization of the hydraulic system while maintenance or repair work is being conducted. Lockout/tagout involves isolating the energy source, such as shutting off the hydraulic pump and locking or tagging the controls to prevent unauthorized operation. This procedure ensures that the hydraulic cylinder remains in a safe, non-operational state during maintenance activities.

6. Use Proper Lifting Techniques:

- When working with heavy hydraulic cylinders or components, use proper lifting techniques and equipment to avoid strain or injury. Hydraulic cylinders can be heavy and awkward to handle, so ensure that lifting equipment, such as cranes or hoists, is properly rated and used correctly. Follow safe lifting practices, including securing the load and maintaining a stable lifting posture.

7. Hydraulic Fluid Handling:

- Handle hydraulic fluid with care and follow proper procedures for fluid filling, transfer, and disposal. Avoid contact with the skin or eyes, as hydraulic fluid may be hazardous. Use appropriate containers and equipment to prevent spills or leaks. If any hydraulic fluid comes into contact with the skin or eyes, rinse thoroughly with water and seek medical attention if necessary.

8. Regular Maintenance:

- Perform regular maintenance and inspections on hydraulic cylinders to ensure their safe and reliable operation. This includes checking for leaks, inspecting seals, monitoring fluid levels, and conducting periodic servicing as recommended by the manufacturer. Proper maintenance helps prevent unexpected failures and ensures the continued safe use of hydraulic cylinders.

9. Follow Manufacturer Guidelines:

- Always follow the manufacturer's guidelines, instructions, and recommendations for the specific hydraulic cylinders and equipment being used. Manufacturers provide important safety information, maintenance schedules, and operational guidelines that should be strictly adhered to for safe and optimal performance.

10. Emergency Preparedness:

- Be prepared for potential emergencies by having appropriate safety equipment, such as fire extinguishers, first aid kits, and emergency eyewash stations, readily available. Establish clear communication channels and emergency response procedures to promptly address any accidents, leaks, or injuries that may occur during hydraulic cylinder operations.

By following these safety precautions, individuals working with hydraulic cylinders can minimize the risk of accidents, injuries, and property damage. It is essential to prioritize safety, maintain awareness of potential hazards, and ensure compliance with relevant safety regulations and industry standards.

China high quality Attractive Price Hydraulic Cylinder Large Excavator Hydraulic Stick Cylinder Manufacturers   vacuum pump for ac	China high quality Attractive Price Hydraulic Cylinder Large Excavator Hydraulic Stick Cylinder Manufacturers   vacuum pump for ac
editor by CX 2023-10-12